Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Earls (St. Albert)

From FireAlarmPedia
Revision as of 17:09, 7 February 2025 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards EST1-2Z3
FACP Location: Main Entrance Vestibule
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: Yes, self-sync
Date of last known Upgrade: 2010s
Year Opened: Late 1990s

Earls is a Canadian chain of upscale restaurants. This page will cover the St. Albert location, located at 10 McKenney Ave #300, St. Albert, AB. The restaurant opened in approximately 1998, and the fire alarm system is original.

System Specifications (late 1990s-present)

FACP

The building is protected by an Edwards EST1-2Z3 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is continuous.

Notification Appliances

All notification appliances are Edwards 439D-10AWC vibrating bells (10” gong), mounted on Edwards 403-5A-R strobe plates (15cd).

Initiating Devices

Pull Stations

There are two pull stations on the system.
There is an Edwards 270-GAO conventional two-stage pull station at one exit, wired as single stage.
There is a Mircom MS-401 conventional single-action pull station at the entrance, installed as a deficiency replacement.

Automatic Detection Devices

None noticed.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on every circuit.