Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Canadian Tire (Dalhousie)

From FireAlarmPedia
Revision as of 01:34, 8 February 2025 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Kidde VS4
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis only
Date of last known Upgrade: 2020
Year Opened: 1982

Canadian Tire is a retail store chain in Canada. This particular store is located at 5404 Dalton Drive, in Calgary, Alberta, Canada. The building is from 1982, and was majorly expanded in 1996. The fire alarm system was installed in 1996, with a panel replacement in 2020.

System Specifications (1996-present)

FACP

The building is protected by a Kidde VS4 conventional fire alarm system. The panel is located in the automotive entrance vestibule. The panel uses Kidde RZI16-2 zone cards to accommodate the system's conventional technology. The system coding is likely temporal.

This panel was installed in 2020 as a replacement for an EST ESA2000.

Notification Appliances

Most notification appliances are Edwards 439D-10AWC vibrating bells (10" gong) with Edwards "Genesis" G1VWN remote strobes (white, wall-mount, no marking, set to 15cd) under them. These strobes were installed in 2020, replacing EST 202-5A-001 remote strobes (red, wall-mount, 15cd).

Aisle 41 has an Edwards 439D-10AWC vibrating bell (10" gong) mounted on a Wheelock RSSP-2415W strobe plate (15cd) as a deficiency replacement.

One area has a Mircom "Select-A-Strobe" FS-240R remote strobe (red, wall-mount, 15cd) as a deficiency replacement installed prior to the full strobe upgrades.

Near the checkout, there are two replacement bells: a Mircom BL-6B motor bell (6" gong) and a Mircom BL-10B motor bell (10" gong). Both were installed as deficiency replacements.

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

None noticed.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.