Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Faith Evangelical Church

From FireAlarmPedia
Revision as of 18:38, 14 March 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-1025T <br />FACP Location: Second Floor Storage Room <br />System Type: Single-Stage Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: N/A <br />Date of last known Upgrade: 2010s <br />Year Opened: 1955, 1973 |} '''Faith Evangelical Church''' is a Christian church located at 1903 19 Ave NW, in C...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1025T
FACP Location: Second Floor Storage Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: 2010s
Year Opened: 1955, 1973

Faith Evangelical Church is a Christian church located at 1903 19 Ave NW, in Calgary, Alberta, Canada. The church was built in 1955, and was expanded in 1973. The fire alarm system was upgraded in 1973, and parts have been replaced as deficiencies occur.

System Specifications (1973-present)

FACP

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the second floor storage room. The system coding is temporal.

Notification Appliances

All notification appliances are Edwards "Durabel" 6100D vibrating bells (10" gong).
There is an Edwards 439D-10AWC vibrating bell (10" gong) in the main floor corridor as a deficiency replacement.

Initiating Devices

Pull Stations

Most pull stations are Edwards 270-SPO conventional single-action pull stations.
Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout the second floor and at the top of each stairwell.
Most main floor rooms have FDD CR-135W conventional 135°F fixed-temperature/rate-of-rise heat detectors.
There is an FDD CF-135W conventional 135°F fixed-temperature heat detector in the second floor furnace room.
There are Edwards 245A conventional 135°F fixed-temperature heat detectors in some rooms.
There is an Edwards 284A conventional 194°F fixed-temperature heat detector in the chapel furnace room.
There are Edwards 283C conventional 135°F fixed-temperature heat detectors in the kitchen.

EOLs

There are Mircom MP-300 end of line resistor plates on Zone 1 and NAC 1.
There is a Notifier EOL-CR end of line resistor plate on the kitchen suppression zone (Zone 2).