Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Brewster Mountain Lodge

From FireAlarmPedia
Revision as of 21:35, 4 May 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier NFS2-3030C <br />FACP Location: Main Entrance <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, System Sensor <br />Date of last known Upgrade: 2018 <br />Most Recent Known Modification: N/A <br /> Year Opened: 1996 |} '''Brewster Mountain Lodge''' is 77-room ho...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS2-3030C
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2018
Most Recent Known Modification: N/A
Year Opened: 1996

Brewster Mountain Lodge is 77-room hotel located at 208 Caribou St, Banff, Alberta. The hotel opened in 1996, and the fire alarm system was upgraded in 2018.

System Specifications (2018-present)

FACP

The building is protected by a Notifier NFS2-3030C addressable fire alarm system. The panel is located at the main entrance. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.

Booster Panels

There are likely multiple Notifier ACPS-610 6/10-amp booster power supplies on the system.

Notification Appliances

All common area notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd).
Each guest room has a System Sensor P2WLA horn/strobe (white, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There are System Sensor FSP-951A addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B300A-6 bases.

Modules

There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Notifier FRM-1A addressable relay modules serving various purposes.
There are Notifier ISO-XA isolator modules on the SLC.

EOLs

There are Notifier EOL-CR end-of-line resistor plates on all sprinkler and signal circuits.

System Specifications (1996-2018)

Former System Specifications
FACP: EST 6632
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s (Smoke Detectors)
Year Installed: 1996
Year Decommissioned: 2018

FACP

The building was protected by an EST 6632 conventional fire alarm system. The panel was located at the main entrance. The system coding was continuous.

Notification Appliances

All common area notification appliances were Edwards "Integrity" 757-5A-HS horn/strobes (red, wall-mount, 15cd).
Each guest room had an Edwards 692-5A-003 mini-horn/strobe (white, wall-mount, 15cd).

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There were System Sensor C2W-BA conventional photoelectric smoke detectors throughout the building.

EOLs

There were Edwards EOL-P1 end-of-line resistor plates on all circuits.