Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Hillhurst-Sunnyside Community Association

From FireAlarmPedia
Revision as of 22:57, 24 May 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier NFS-320C <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, System Sensor <br />Date of last known Upgrade: 2012 <br />Most Recent Known Modification: N/A <br /> Year Opened: 1978 |} '''Hillhurst-Sunnyside Community As...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2012
Most Recent Known Modification: N/A
Year Opened: 1978

Hillhurst-Sunnyside Community Association is a community center located at 1320 5 Ave NW, Calgary, Alberta. The centre opened in 1978, and the fire alarm system was upgraded in 2012.

System Specifications (2012-present)

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances

All indoor notification appliances are System Sensor "SpectrAlert Advance" P2RA horn/strobes (red, wall-mount, set to 15cd).
For exterior notification, there is a System Sensor SRKA weatherproof remote strobe (red, wall-mount, set to 75cd) outside the main entrance.

Initiating Devices

Pull Stations

All pull stations are Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules.

Automatic Detection Devices

There are Notifier FST-851RA addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
There are likely Notifier FSP-851A addressable photoelectric smoke detectors in some areas as well.
All detectors are mounted on Notifier B710LPA bases.

EOLs

There are Notifier EOL-CR end-of-line resistor plates on all signal circuits.