Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Cedars of Calgary Building A

From FireAlarmPedia
Revision as of 20:55, 16 June 2025 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-1025T <br />FACP Location: A3 Electrical Room<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal <br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: 2010s, Smokes<br />Year Opened: 1977 |} '''Cedars of Calgary''' is an apartment complex loca...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1025T
FACP Location: A3 Electrical Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s, Smokes
Year Opened: 1977


Cedars of Calgary is an apartment complex located at 215 86 Ave SE, Calgary, Alberta, Canada. The complex is owned and operated by Shelter Canadian Properties. This page will cover Building A, which was built in 1977. The fire alarm system is mostly original, with devices replaced as deficiencies occur.

System Specifications

FACP

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the A3 electrical room. The system coding is temporal.
This panel replaced the original Edwards 1523.

Annunciators

There is a Mircom RA-105 annunciator at the C2 entrance.

Notification Appliances

All indoor notification appliances but one are Edwards "Durabel" 6100D vibrating bells (6" gong).
There is a Mircom BL-6A motor bell (6" gong) as a deficiency replacement.
For outdoor notification, there is an Edwards 439D-6AWC vibrating bell (6" gong) with a red beacon outside the A3 entrance; the bell was a deficiency replacement.

Pull Stations

All pull stations but one are Edwards 270-SPO conventional single-action pull stations.
There is a Summit SPS-101CA conventional single-action pull station as a deficiency replacement.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout the building.
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell but one.
One stairwell has an FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detector.
The electrical, mechanical and laundry rooms have a mix of the following:

  • System Sensor 5604A conventional 194°F fixed-temperature heat detectors
  • Potter CF-135W conventional 135°F fixed-temperature heat detectors
  • FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors