Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Cedars of Calgary Building H

From FireAlarmPedia
Revision as of 20:57, 16 June 2025 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-1000 <br />FACP Location: H4 Electrical Room<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: 2010s, Smokes<br />Year Opened: 1977 |} '''Cedars of Calgary''' is an apartment complex located...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1000
FACP Location: H4 Electrical Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s, Smokes
Year Opened: 1977

Cedars of Calgary is an apartment complex located at 215 86 Ave SE, Calgary, Alberta, Canada. The complex is owned and operated by Shelter Canadian Properties. This page will cover Building H, which was built in 1977. The fire alarm system is mostly original, with devices replaced as deficiencies occur.

System Specifications

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the H4 electrical room. The system coding is temporal.
This panel replaced the original Edwards 1523.

Annunciators

There is a Mircom RAM-1032TZDS annunciator at the H4 entrance, mounted in a Mircom BB-1001 cabinet.

Notification Appliances

Most notification appliances are Edwards "Durabel" 6100D vibrating bells (6" gong).
There are Edwards 439D-6AWC vibrating bells (6" gong) as deficiency replacements.
There are also Mircom BL-6B motor bells (6" gong) as deficiency replacements.
For exterior notification, there is an Edwards "Adaptabel" 343D vibrating bell (6" gong) with a red beacon outside the H4 vestibule.

Initiating Devices

Pull Stations

Most pull stations are Edwards 270-SPO conventional single-action pull stations.
Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.
There is one Fire-Lite BG-12 conventional dual-action pull station as a deficiency replacement.


Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout the building.
There are Potter CF-135W conventional 135°F fixed-temperature heat detectors in the mechanical, laundry and electrical rooms.
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell except one.
There is an FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detector at the top of one stairwell.