More actions
| System Specifications |
|---|
| FACP: Notifier NFS2-640C FACP Location: Lobby System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Wheelock Only Date of last known Upgrade: 2021 Year Opened: 1996 |
Canmore Inn & Suites is a 3-star hotel located at 1402 Bow Valley Trail, in Canmore, Alberta, Canada. It was built in 1996 as Ramada, and became Canmore Inn & Suites in 2017. A partial fire alarm upgrade involving replacement of some notification appliances and the main FACP occurred in 2021.
System Specifications (2021 present)
FACP
The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the lobby, and is equipped with the NCA-2 display. The system coding is temporal.
Notification Appliances
All common area notification appliances are System Sensor "L-Series" HRLA remote horns (red, wall-mount) mounted on Wheelock RSSP-24MCW strobe plates (red, set to 15cd).
All guest rooms have EST 692-3A-103 mini-horn/strobes (white, wall-mount, 30cd).
Initiating Devices
Pull Stations
All pull stations are Edwards 270-SPO conventional pull stations.
Automatic Detection Devices
There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all common areas.
EOLs
There are Edwards EOL-P1 end of line resistor plates on all initiating and signal circuits.
Former System Specifications (1996-2021)
| System Specifications |
|---|
| FACP: Simplex 4100U FACP Location: Lobby System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous? Strobes Synchronized: No |
FACP
The building was protected by a Simplex 4100U conventional fire alarm system. The panel was located in the lobby, and had a 3 bay cabinet; it replaced the original EST ESA2000 around 2005. The system coding was likely continuous.
Notification Appliances
All common area notification appliances were Edwards 439D-6AWC vibrating bells (6" gong) mounted on EST "Integrity" 403-5A-R strobe plates (red, 15cd).
The workout room had the aforementioned bell installed remotely.
The pool area had an Edwards 439D-10AWC vibrating bell (10" gong) mounted on an EST 403-5A-R strobe plate, due to higher ambient noise levels.
The guest rooms had EST 692-3A-103 mini-horn/strobes (white, 30cd), these are still in service.
Initiating Devices
Pull Stations
All pull stations were Edwards 270-SPO conventional pull stations.
Automatic Detection Devices
There were System Sensor C2W-BA conventional photoelectric smoke detectors throughout all common areas.
EOLs
There were Edwards EOL-P1 end of line resistor plates on all initiating and signal circuits.