Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Landmark Estates Building 3737

From FireAlarmPedia
Revision as of 20:09, 3 September 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-1000<br />FACP Location: Main Floor Corridor<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: 2010s, FACP<br />Year Opened: 1979 |} '''Landmark Estates II''' is an apartment complex owned a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1000
FACP Location: Main Floor Corridor
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s, FACP
Year Opened: 1979

Landmark Estates II is an apartment complex owned and operated by Envision Property Management. This page will cover Building 3737, located at 3737 42 St NW, in Calgary, Alberta, Canada. The building was built in 1979, and the fire alarm system is mostly original.

System Specifications

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the main floor corridor. The system coding is temporal.

Annunciators

There is a Mircom RAM-1032TZDS annunciator in the northeast entrance vestibule, mounted in a Mircom BB-1001 enclosure.

Notification Appliances

All notification appliances are Mirtone 74303 vibrating bells (6" gong).

Initiating Devices

Pull Stations

Most pull stations are Edwards 275-C111 conventional single-action pull stations.
Some areas have Edwards 270-SPO conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all corridors.
There are Mirtone 73320 conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell.
There is a Mirtone 73330 conventional 135°F fixed-temperature heat detector in the boiler room.
There is an Edwards 281C conventional 135°F fixed-temperature/rate-of-rise heat detector in the laundry room.

EOLs

There are Mirtone 79064 end of line resistor plates on all circuits.