Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Renfrew Baptist Church

From FireAlarmPedia
Revision as of 18:36, 4 September 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-300<br />FACP Location: Main Entrance<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: 1988<br />Most Recent Known Modification: 2010s, FACP<br />Year Opened: 1959 |} '''Renfrew Baptist Church''' is a church located at 1208 Renfre...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-300
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: 1988
Most Recent Known Modification: 2010s, FACP
Year Opened: 1959

Renfrew Baptist Church is a church located at 1208 Renfrew Drive NE, in Calgary, Alberta, Canada. The church was built in 1959, and the fire alarm system was upgraded in 1988, with an FACP replacement occurring in the 2010s.

System Specifications (1988-present)

FACP

The building is protected by a Mircom FA-300 conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.
This panel replaced an Edwards 2280.

Notification Appliances

All notification appliances but one are Edwards 439D-6AWC vibrating bells (6" gong).
There is a Mircom BL-6B motor bell (6" gong) in the main chapel as a deficiency replacement.

Initiating Devices

Pull Stations

Most pull stations are Edwards 270-SPO conventional single-action pull stations.
Some areas have Edwards 270-SPOE conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all corridors, in the main chapel, and in some other rooms.
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors in some rooms.
There are System Sensor 5604A conventional 194°F fixed-temperature heat detectors in all mechanical rooms.

EOLs

There are a mix of Edwards EOL-P1 and Mircom MP-300 end of line resistor plates on all circuits.