Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Trolley Square

From FireAlarmPedia
Revision as of 18:50, 4 September 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier NFS2-640C<br />FACP Location: South Entrance Vestibule<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal<br>Strobes Synchronized: Yes, System Sensor<br />Date of last known Upgrade: 2014<br />Most Recent Known Modification: N/A<br />Year Opened: 1962 |} '''Trolley Square''' is an office building...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS2-640C
FACP Location: South Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2014
Most Recent Known Modification: N/A
Year Opened: 1962

Trolley Square is an office building located at 508 24 Ave SW, in Calgary, Alberta, Canada. The building was built in 1962, and was renovated in 2014. The fire alarm system was upgraded as part of the 2014 renovation.

System Specifications (2014-present)

FACP

The building is protected by a Notifier NFS2-640C addressable fire alarm system. The panel is located in the south entrance vestibule. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.

Booster Panels

There is a Notifier FCPS-24S8C 8-amp booster power supply in the third floor electrical room, triggered by NAC 2 of the FACP.

Notification Appliances

Most notification appliances are System Sensor "SpectrAlert Advance" P2RA horn/strobes (red, wall-mount, set to 15cd).
Some areas have System Sensor PC2WA horn/strobes (white, ceiling-mount, set to 15cd).
Some areas have System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).
Some areas have System Sensor PC2WLA horn/strobes (white, ceiling-mount, bilingual lettering, set to 15cd).
The parkade areas have System Sensor P2RKA weatherproof horn/strobes (red, wall-mount, set to 75cd).
For outdoor notification, there is a System Sensor SRKA weatherproof remote strobe (red, wall-mount, set to 75cd) outside the south entrance.

Initiating Devices

Pull Stations

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There are Notifier FSP-851A addressable photoelectric smoke detectors throughout most areas, throughout the public areas of the bar, and at the top of the elevator shaft.
There are Notifier FST-851A addressable 135°F fixed-temperature heat detectors in some areas.
There are Notifier FST-851RA addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
There are Notifier FST-851HA addressable 190°F fixed-temperature heat detectors in all kitchens and mechanical rooms.
All aforementioned detectors are mounted on a mix of System Sensor B210LPA and Notifier B710LPA bases.
There is an FDD CR-135-EWP explosionproof conventional 135°F fixed-temperature/rate-of-rise heat detector in the gas meter room, wired to a Notifier FMM-101A addressable monitor module.

Modules

There is a Notifier FMM-1A addressable monitor module supervising the kitchen suppression system.
There are Notifier FRM-1A addressable relay modules for elevator recall and fire door release.
There are Notifier ISO-XA isolator modules on the SLC.

EOLs

There are Notifier EOL-CR end of line resistor plates on all kitchen suppression and signal circuits.