Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

The Mall at Piccadilly

From FireAlarmPedia
Revision as of 21:49, 18 December 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Fire-Lite MS-9200UDLS<br />FACP Location: Main Electrical Room?<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal?<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: 2010s, FACP<br />Year Opened: 1977 |} '''The Mall At Piccadilly''' is a shopping mall...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Fire-Lite MS-9200UDLS
FACP Location: Main Electrical Room?
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal?
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s, FACP
Year Opened: 1977

The Mall At Piccadilly is a shopping mall located at 1151 10 Ave SW, in Salmon Arm, British Columbia, Canada. The mall was built in 1977, and the fire alarm system is mostly original.

System Specifications

Please note that some information may be missing, as research time was limited for this facility. This page should not be used for official purposes.

FACP

The building is protected by a Fire-LIte MS-9200UDLSC conventional fire alarm system. The panel is likely located in the main electrical room. The system is equipped with several Fire-Lite MMF-302-6 zone cards, and the system coding is likely temporal.
This panel replaced an Edwards Custom 6500 in the 2010s.

Annunciators

There are two Fire-Lite ANN-LED annunciators in the main entrance vestibule.

Notification Appliances

All notification appliances are Edwards "Durabel" 6100D vibrating bells (10" gong).

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

None noticed.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.