Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Staples (Fort McMurray)

From FireAlarmPedia
Revision as of 22:00, 18 December 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Edwards iO1000<br />FACP Location: Electrical Room<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: No<br />Date of last known Upgrade: N/A <br />Most Recent Known Modification: 2023, FACP<br />Year Opened: 1999 |} Staples is a chain of office supply stores. This particular st...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards iO1000
FACP Location: Electrical Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Most Recent Known Modification: 2023, FACP
Year Opened: 1999

Staples is a chain of office supply stores. This particular store is located at 8544 Manning Ave, Fort McMurray, Alberta, Canada. The store opened in 1999, and the fire alarm system is mostly original.

System Specifications

FACP

The building is protected by an Edwards iO1000 conventional fire alarm system. The panel is located in the electrical room. The system has an Edwards RZI16-2 zone card to accommodate the conventional zones, and the system coding is temporal.
This panel replaced a Mircom Series FA-1000.

Annunciators

There is an Edwards RLED24 annunciator by the checkouts.

Notification Appliances

All notification appliances are System Sensor "SpectrAlert" P2415A horn/strobes (red, wall-mount, 15cd, set to electromechanical).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices

There are Edwards 281B-PL conventional 135°F fixed-temperature/rate of rise heat detectors located in electrical, mechanical or similar rooms.
There is an FDD CR-135 135°F fixed-temperature/rate of rise heat detector at the top of the stairwell.
Each return air unit has a System Sensor DH400A conventional ionization duct smoke detector.

EOLs

All end-of-line resistors are in an electrical box above the FACP, on all circuits.