Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

True North Automation

From FireAlarmPedia
Revision as of 15:29, 6 March 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Simplex 4010<br />FACP Location: Main Floor Elevator Lobby<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal?<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: 2000s<br />Most Recent Known Modification: N/A<br />Year Opened: 1982 |} '''True North Automation''' is an automation company locate...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Simplex 4010
FACP Location: Main Floor Elevator Lobby
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal?
Strobes Synchronized: N/A
Date of last known Upgrade: 2000s
Most Recent Known Modification: N/A
Year Opened: 1982

True North Automation is an automation company located at 7180 11 St SE, in Calgary, Alberta, Canada. The building was built in 1982, and the fire alarm system is mostly original.

System Specifications

FACP

The building is protected by a Simplex 4010 conventional fire alarm system. The panel is located in the main floor elevator lobby. The system coding is likely temporal.
This panel replaced a Pyrotronics System 3.

Notification Appliances

Most notification appliances are Pyr-A-Larm BDC-624C vibrating bells (6" gong).
Some areas have Mircom BL-6B motor bells (6" gong), and other areas have Edwards "Durabel" 6100D vibrating bells (6" gong).

Initiating Devices

Pull Stations

Most pull stations are Pyrotronics MS-51 conventional single-action pull stations.
Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices

There are Mirtone 73330 conventional 135°F fixed-temperature heat detectors in some rooms.
There are Potter CR-135W conventional 135°F fixed-temperature/rate-of-rise heat detectors in all kitchens.
There are Edwards C2M-PD conventional photoelectric smoke detectors at the top of each stairwell, and in one automation lab.
There are System Sensor 1400A conventional ionization smoke detectors in all server rooms and in one automation lab.

EOLs

There are Simplex 2081-9040C end of line resistor plates on all circuits.