Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

3755 Market Street SE, Calgary, AB

From FireAlarmPedia
Revision as of 15:34, 6 March 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-401<br />FACP Location: Main Electrical Room<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: Yes, Mircom<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 2024 |} '''3755 Market Street SE''' is the address of a small comm...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-401
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 2024

3755 Market Street SE is the address of a small commercial plaza in the Seton neighborhood of Calgary, Alberta, Canada. As of February 2026, the only tenant is Long & McQuade. The building was built in 2024, and the fire alarm system is original.

System Specifications

FACP

The building is protected by a Mircom FX-401 addressable fire alarm system. The panel is located in the main electrical room. The system runs Mircom's MGC addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the main entrance vestibule.
Both annunciators are mounted in a Mircom BB-1002 enclosure.

Notification Appliances

All indoor notification appliances are Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).
For outdoor notification, there is a System Sensor "SpectrAlert Advance" SRKA weatherproof remote strobe (red, wall-mount) outside the main electrical room.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401MP addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-4010 addressable photoelectric smoke detectors at the top of each stairwell and in the main electrical room.

Modules

There are Mircom MIX-4040 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Mircom MIX-4045 addressable relay modules serving various purposes.
There are Mircom MIX-4070 isolator modules on the SLC.

EOLs

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.