Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

The Alanna Apartments

From FireAlarmPedia
Revision as of 15:35, 6 March 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-106<br />FACP Location: Main Electrical Room<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: 2010s, Bell<br />Year Opened: 1978 |} '''The Alanna Apartments''' is an apartment building locat...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-106
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s, Bell
Year Opened: 1978

The Alanna Apartments is an apartment building located at 909 2 Ave NW, in Calgary, Alberta, Canada. The building was built in 1978, and the fire alarm system is partially original.

System Specifications

FACP

The building is protected by a Mircom FA-106 conventional fire alarm system. The panel is located in the main electrical room. The system coding is temporal.
This panel replaced an Edwards 1527.

Notification Appliances

All notification appliances but one are Edwards "Durabel" 6100D vibrating bells (6" gong).
There is an Edwards 439D-6AWC vibrating bell (6" gong) on the first floor as a deficiency replacement.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all corridors and at the top of each stairwell.
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors in the laundry room, basement storage room, and main electrical room.
There are System Sensor 5603A conventional 135°F fixed-temperature heat detectors in the main floor storage room and mechanical room.

EOLs

There is an unbranded end-of-line resistor plate on the zone; the NAC EOL is located in a bell.