Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

HSE Integrated (Edmonton)

From FireAlarmPedia
Revision as of 15:40, 6 March 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier NFS-320C<br />FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal<br>Strobes Synchronized: Yes, System Sensor<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 2021 |} '''HSE Integrated''' is a Health & Safety ser...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 2021

HSE Integrated is a Health & Safety service provider. This page will cover the Edmonton branch, located at 1502 92 Ave NW, in Edmonton, Alberta, Canada. The building was built in 2021, and the fire alarm system is original.

System Specifications

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances

Most notification appliances are System Sensor "L-Series" P2RLA-E horn/strobes (red, wall-mount, English lettering, set to 15cd).
All washrooms have System Sensor SRLA-E remote strobes (red, wall-mount, English lettering, set to 15cd).
The wash bay has System Sensor "SpectrAlert Advance" P2RKA weatherproof horn/strobes (red, wall-mount).
For outdoor notification, there is a Federal Signal FB24ST beacon outside the main entrance.

Initiating Devices

Pull Stations

Most pull stations are Notifier NBG-12LX addressable dual-action pull stations.
The wash bay has Notifier NBG-12LO conventional weatherproof dual-action pull stations, wired to Notifier FMM-101A addressable monitor modules.

Automatic Detection Devices

There are Notifier FSP-951A addressable photoelectric smoke detectors at the top of each stairwell, mounted on System Sensor B300A-6 bases.

Modules

There are Notifier FDM-1A addressable dual-input monitor modules supervising the sprinkler system's tamper and flow switches.
There are Notifier ISO-XA isolator modules on the SLC.

EOLs

There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.