Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Church of Jesus Christ of Latter Day Saints (Parkland)

From FireAlarmPedia
Revision as of 16:23, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Simplex 4005<br />FACP Location: Chapel Overflow Hall Closet<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: 2003<br />Most Recent Known Modification: N/A<br />Year Opened: 1978, 2003 |} The '''Church of Jesus Christ of Latter Day Saints'''...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Simplex 4005
FACP Location: Chapel Overflow Hall Closet
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: 2003
Most Recent Known Modification: N/A
Year Opened: 1978, 2003

The Church of Jesus Christ of Latter Day Saints is a church with locations around the world. This particular church is located at 14540 Parkland Blvd SE, in Calgary, Alberta, Canada. The building was built in 1978, and was expanded in 2003. The fire alarm system was upgraded as part of the 2003 expansion.

System Specifications (2003-present)

Please note that this information is accurate to 2023.

FACP

The building is protected by a Simplex 4005 conventional fire alarm system. The panel is located in the chapel overflow hall closet. The system coding is likely temporal.

Notification Appliances

All notification appliances are Notifier KMS-6-24VDC/P motor bells (6" gong).

Initiating Devices

Pull Stations

All pull stations are Simplex MS-301C conventional single-action pull stations.

Automatic Detection Devices

There are a mix of FDD CR-135 and System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors in most rooms and closets.
There are Edwards 284B-PL conventional 194°F fixed-temperature heat detectors in the mechanical room and Room M101.

EOLs

There are Simplex 2081-9040C end of line resistor plates on all circuits.