Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Church of Jesus Christ of Latter Day Saints (Forest Lawn)

From FireAlarmPedia
Revision as of 16:24, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Edwards 2280<br />FACP Location: West Entrance<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Continuous<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: 1981<br />Most Recent Known Modification: N/A<br />Year Opened: 1976, 1981 |} The '''Church of Jesus Christ of Latter Day Saints''' is a church...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards 2280
FACP Location: West Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: N/A
Date of last known Upgrade: 1981
Most Recent Known Modification: N/A
Year Opened: 1976, 1981

The Church of Jesus Christ of Latter Day Saints is a church with locations around the world. This particular church is located at 833 44 St SE, in Calgary, Alberta, Canada. The building was built in 1976, and was expanded in 1981. The fire alarm system was upgraded as part of the 1981 expansion.

System Specifications (1981-present)

Please note that this information is accurate to 2023.

FACP

The building is protected by an Edwards 2280 conventional fire alarm system. The panel is located at the west entrance. The system coding is continuous.

Notification Appliances

All notification appliances are Edwards "Durabel" 6100D vibrating bells (6" gong).

Initiating Devices

Pull Stations

All pull stations are a mix of Edwards CCS-452 and 274-111 conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors throughout most areas.
There are a mix of System Sensor 5603A conventional 135°F fixed-temperature heat detectors and Edwards 284A conventional 194°F fixed-temperature heat detectors in the kitchen and room M3.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.