Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Church of Jesus Christ of Latter Day Saints (Drumheller)

From FireAlarmPedia
Revision as of 16:25, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-2000<br />FACP Location: SW Main Entrance<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: No<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 2007 |} The '''Church of Jesus Christ of Latter Day Saints''' is a church with...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: SW Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 2007

The Church of Jesus Christ of Latter Day Saints is a church with locations around the world. This particular church is located at 1455 4 Ave NW, in Drumheller, Alberta, Canada. The building was built in 2007, and the fire alarm system is likely original.

System Specifications

Please note that this information is accurate to 2023.

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located at the southwest main entrance. The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-5251RBA addressable 135°F fixed-temperature/rate-of-rise heat detectors in the kitchen, and all furnace, janitor and storage rooms.
There are Mircom MIX-5251BA addressable 135°F fixed-temperature heat detectors in the crawlspace.
All detectors are mounted on System Sensor B210LPA bases.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.