Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Church of Jesus Christ of Latter Day Saints (Crystal Ridge)

From FireAlarmPedia
Revision as of 16:25, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: EST QuickStart QS1<br />FACP Location: South Entrance<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: Yes, Self-Sync<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 2005 |} The '''Church of Jesus Christ of Latter Day Saints''' is...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: EST QuickStart QS1
FACP Location: South Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Self-Sync
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 2005

The Church of Jesus Christ of Latter Day Saints is a church with locations around the world. This particular church is located at 384 Bannister Drive, in Okotoks, Alberta, Canada. The building was built in 2005, and the fire alarm system is original.

System Specifications

Please note that this information is accurate to 2023.

FACP

The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located at the south entrance. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Notification Appliances

Most notification appliances are Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
All washrooms have Edwards G1R-VM remote strobes (red, wall-mount, no marking, set to 15cd).
For outdoor notification, there is an Edwards CS405-7A-T weatherproof remote strobe (red) outside the south entrance.

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices

There are EST SIGA-PS addressable photoelectric smoke detectors throughout all corridors.
There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors in the attic.
All detectors are mounted on EST SIGA-SB bases.

Modules

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.