Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Lincoln Tower

From FireAlarmPedia
Revision as of 16:31, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-1000<br />FACP Location: Main Floor Hallway<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal?<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: 1980s<br />Most Recent Known Modification: N/A<br />Year Opened: 1963 |} '''Lincoln Tower''' is an apartment building located at 703 14...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1000
FACP Location: Main Floor Hallway
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal?
Strobes Synchronized: N/A
Date of last known Upgrade: 1980s
Most Recent Known Modification: N/A
Year Opened: 1963

Lincoln Tower is an apartment building located at 703 14 Ave SW, in Calgary, Alberta, Canada. The building was built in 1963, and the fire alarm system was upgraded in the late 1980s.

System Specifications (1980s-present)

Please note that these system details are accurate to 2018.

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the main floor hallway. The system coding is likely temporal.

Notification Appliances

All notification appliances are Edwards 439D-6AWC vibrating bells (6" gong).

Initiating Devices

Pull Stations

All pull stations are Edwards 275-C111 conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in all corridors.
There are Edwards 281C conventional 135°F fixed-temperature/rate-of-rise heat detectors in the pool area, elevator machine room, and laundry room.
There are Edwards CF-200 conventional 200°F fixed-temperature heat detectors in the furnace and electrical rooms.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.