Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Douglasdale Golf Course

From FireAlarmPedia
Revision as of 16:32, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Edwards 2280 (FORMER)<br />FACP Location: Main Entrance<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Continuous<br>Strobes Synchronized: No<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: 2024, FACP<br />Year Opened: 1986 |} The '''Douglasdale Golf Course''' is a golf course locate...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards 2280 (FORMER)
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Most Recent Known Modification: 2024, FACP
Year Opened: 1986

The Douglasdale Golf Course is a golf course located at 7 Douglaswoods Drive SE, in Calgary, Alberta, Canada. The building was built in 1986, and the fire alarm system is original.
Please note that these system specifications are accurate to 2019, and the FACP was replaced in 2024.

System Specifications

FACP

The building is protected by an Edwards 2280 conventional fire alarm system. The panel is located at the main entrance. The system coding is continuous.

Notification Appliances

Most notification appliances are Edwards 439D-6AWC vibrating bells (6" gong) mounted on Edwards 403-5A-R strobe plates (15cd).
Some areas have Edwards 439D-10AWC vibrating bells (10" gong), mounted remotely.

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in all washrooms, in the attic, in all storage rooms, and in the pro shop mechanical room.
There are FDD CF-200 conventional 200°F fixed-temperature heat detectors in the kitchen.
There are System Sensor C2W-BA conventional photoelectric smoke detectors by the north exit, and in the pro shop.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.