Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

38 Inverness Square SE, Calgary, AB

From FireAlarmPedia
Revision as of 16:34, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier System 500<br />FACP Location: Main Entrance<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: No<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 1998 |} '''38 Inverness Square SE''' is the address of a small walkup apart...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier System 500
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 1998

38 Inverness Square SE is the address of a small walkup apartment building in the McKenzie Towne neighborhood of Calgary, Alberta, Canada. The building was built in 1998, and the fire alarm system is original.

System Specifications

Please note that most system information is unconfirmed, as available information is limited. This page should not be used for official purposes.

FACP

The building is protected by a Notifier System 500 conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.

Notification Appliances

All notification appliances are System Sensor "SpectrAlert" P2415A horn/strobes (red, wall-mount, 15cd).

Initiating Devices

Pull Stations

All pull stations are Notifier NFM-950B conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in all corridors.
There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in the crawlspace, and in all storage and electrical rooms.
There are FDD CF-200 conventional 200°F fixed-temperature heat detectors in the mechanical room.
There are System Sensor "Innovair Flex" D2A conventional photoelectric duct smoke detectors on all air handling units.

EOLs

There are Notifier EOL-CR end of line resistor plates on all circuits.