Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Prominence Place Building A

From FireAlarmPedia
Revision as of 16:37, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-1000<br />FACP Location: Main Entrance<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 1983 |} '''Prominence Place''' is an apartment complex owned and operated by Bo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1000
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 1983

Prominence Place is an apartment complex owned and operated by Boardwalk. This page will cover Building A, located at 401 Patterson Hill SW, in Calgary, Alberta, Canada. The building was built in 1983, and the fire alarm system is partially original.

System Specifications

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.

Notification Appliances

All notification appliances are Mircom BL-6B motor bells (6" gong).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in all corridors and at the top of each stairwell.
There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in all laundry and electrical rooms.
There are FDD CF-200 conventional 200°F fixed-temperature heat detectors in the boiler room.

EOLs

There are Mircom MP-300 end of line resistor plates on all circuits.