Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

8657 51 Ave NW, Edmonton, AB

From FireAlarmPedia
Revision as of 16:40, 3 May 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Kidde VS4<br />FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal<br>Strobes Synchronized: Yes, Genesis<br />Date of last known Upgrade: 2000s<br />Most Recent Known Modification: N/A<br />Year Opened: 1982 |} '''8657 51 Ave NW''' is the address of a small office bui...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Kidde VS4
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2000s
Most Recent Known Modification: N/A
Year Opened: 1982

8657 51 Ave NW is the address of a small office building in Edmonton, Alberta, Canada. The building was built in 1982, and the fire alarm system was upgraded in the mid 2000s.

System Specifications (2000s-present)

FACP

The building is protected by a Kidde VS4 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Kidde's GSA addressable protocol, and the system coding is temporal.

Booster Panels

There are Edwards BPS10AC 10-amp booster power supplies in some electrical rooms.

Notification Appliances

Most notification appliances are Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
Some areas have Edwards G1RF-HDVM horn/strobes (red, wall-mount, FIRE marking, set to 15cd) and Edwards G1AVWN horn/strobes (red, wall-mount, no marking, set to 15cd).
Some areas have Edwards GCAVWN horn/strobes (white, ceiling-mount, no marking, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices

There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on EST SIGA-SB bases.

Modules

There are EST SIGA-CT2 addressable dual-input monitor modules supervising the sprinkler system's tamper and flow switches.
There are EST SIGA-CR addressable relay modules serving various purposes.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.