Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Dalgetty Village Building B

From FireAlarmPedia
Revision as of 17:29, 3 September 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-1000br />FACP Location: Main Electrical Room<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 1977 |} '''Dalgetty Village''' is an apartment complex located at 5735 Da...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1000br />FACP Location: Main Electrical Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 1977

Dalgetty Village is an apartment complex located at 5735 Dalgetty Dr NW, in Calgary, Alberta, Canada. The complex is owned and operated by Shelter Canadian. This page will cover Building B, which was built in 1977. The fire alarm system is original excluding deficiency replacements.

System Specifications

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the main electrical room. The system coding is temporal.
This panel replaced an Edwards 2280.

Annunciators

There is a Mircom RAM-1032TZDS annunciator at the main entrance, mounted in a Mircom BB-1001 enclosure.

Notification Appliances

Most notification appliances are a mix of Edwards "Adaptabel" 343D and Edwards "Durabel" 6100D vibrating bells (6" gong).
Some areas have Mircom BL-6B motor bells (6" gong) as deficiency replacements.
All bells are mounted behind metal grilles.

Initiating Devices

Pull Stations

Most pull stations are Edwards 270-SPO conventional single-action pull stations.
Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all corridors and at the top of each stairwell.
There are Mirtone 7330 conventional 135°F fixed-temperature heat detectors in the laundry and boiler rooms.
There is a System Sensor 5604A conventional 194°F fixed-temperature heat detector in the electrical room.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.