Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

South Shore Centre

From FireAlarmPedia
Revision as of 17:38, 3 September 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Edwards EST3X<br />FACP Location: Main Entrance<br />System Type: Two-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: 20BPM (Alert)<br>Temporal (Alarm)<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: 2010s, FACP<br />Year Opened: 1975 |} '''South Shore Centre''' is a shopping mall...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards EST3X
FACP Location: Main Entrance
System Type: Two-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (Alert)
Temporal (Alarm)
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s, FACP
Year Opened: 1975

South Shore Centre is a shopping mall located at 421 Lahave Street, in Bridgewater, Nova Scotia, Canada. The mall was built in 1975, and the fire alarm system is mostly original.

System Specifications

FACP

The building is protected by an Edwards EST3X conventional fire alarm system. The panel is located at the main entrance. The system is configured for two-stage operation. The alert signal coding is 20BPM, and the alarm signal coding is temporal.

Notification Appliances

Most notification appliances are Edwards MB10-24 motor bells (10" gong).
Edwards "Durabel" 6100D vibrating bells (10" gong), Edwards 439D-10AWC vibrating bells (10" gong) and General Signal MB10-24 motor bells (10" gong) are also installed on this system.

Initiating Devices

Pull Stations

All pull stations are Edwards 270-GAO conventional two-stage single-action pull stations.

Automatic Detection Devices

None noticed, devices are likely present on this system.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.

Credits

Thank you to NSS for submitting this system!