Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Marda Loop Communities Association

From FireAlarmPedia
Revision as of 17:47, 3 September 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Siemens FS-250C<br />FACP Location: Main Entrance<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal<br>Strobes Synchronized: Yes, Siemens<br />Date of last known Upgrade: 2000s<br />Most Recent Known Modification: N/A<br />Year Opened: 1984 |} The '''Marda Loop Communities Association''' is a community c...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Siemens FS-250C
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Siemens
Date of last known Upgrade: 2000s
Most Recent Known Modification: N/A
Year Opened: 1984

The Marda Loop Communities Association is a community centre located at 3130 16 St SW, in Calgary, Alberta, Canada. The building was built in 1984, and the fire alarm system was upgraded in the 2000s.

System Specifications (2000s-present)

Please note that this information is accurate to 2020.

FACP

The building is protected by a Siemens "FireSeeker" FS-250C addressable fire alarm system. The panel is located at the main entrance. The system runs Siemens' FirePrint addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are Siemens MBDC-10C motor bells (10" gong).

Initiating Devices

Pull Stations

All pull stations are Siemens SMS-SA addressable single-action pull stations.

Automatic Detection Devices

There are Siemens SFP-11C addressable multisensor smoke detectors throughout most areas.
There are Siemens SFPT-11 addressable heat detectors in all storage, janitor and furnace rooms.
All detectors are mounted on Siemens DB-11 bases.

EOLs

There are Siemens EL-300C end of line resistor plates on all signal circuits.