Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Preferred Childcare

From FireAlarmPedia
Revision as of 17:50, 3 September 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Cerberus TXL<br />FACP Location: Mechanical Room<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Continuous<br>Strobes Synchronized: No<br />Date of last known Upgrade: 1990s<br />Most Recent Known Modification: N/A<br />Year Opened: 1978 |} '''Preferred Childcare''' is a childcare facility located at 3109 Pa...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Cerberus TXL
FACP Location: Mechanical Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: 1990s
Most Recent Known Modification: N/A
Year Opened: 1978

Preferred Childcare is a childcare facility located at 3109 Palliser Drive SW, in Calgary, Alberta, Canada. The building was built in 1978, and the fire alarm system was upgraded in the 1990s.

System Specifications (1990s-present)

FACP

The building is protected by a Cerberus Pyrotronics TXL conventional fire alarm system. The panel is located in the mechanical room. The system coding is continuous.

Notification Appliances

Most notification appliances are Edwards 439D-10AWC vibrating bells (10" gong) mounted on Edwards 403-5A-R strobe plates (15cd).
All washrooms have Edwards 202-5A-T remote strobes (red, 15cd).

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in most areas.
There are a mix of FDD CR-135 and System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
There is an FDD CF-200 conventional 200°F fixed-temperature heat detector in one room.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.