Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Varsity Place Apartments Building A

From FireAlarmPedia
Revision as of 17:51, 3 September 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-102T<br />FACP Location: Main Electrical Room<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br />System Coding: Temporal<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 1977 |} '''Varsity Place Apartments''' is an apartment complex owned and...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-102T
FACP Location: Main Electrical Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 1977

Varsity Place Apartments is an apartment complex owned and operated by Boardwalk. This page will cover Building A, located at 3607 49 St NW, in Calgary, Alberta, Canada. The building was built in 1977, and the fire alarm system is mostly original.

System Specifications

FACP

The building is protected by a Mircom FA-102T conventional fire alarm system. The panel is located in the main electrical room. The system coding is temporal.
This panel replaced an Edwards 1527.

Notification Appliances

All notification appliances are Mircom BL-10A motor bells (10" gong).

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in all corridors and at the top of each stairwell.
There is an FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detector in the laundry room.
There is a Potter CR-135W conventional 135°F fixed-temperature/rate-of-rise heat detector in the electrical room.
There is a Mirtone 73330 conventional 135°F fixed-temperature heat detector in the mechanical room.

EOLs

There are unbranded end of line resistor plates on all circuits.