Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Sunbow Terrace Condos

From FireAlarmPedia
Revision as of 17:56, 3 September 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Edwards 2280<br />FACP Location: Main Entrance<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Continuous<br>Strobes Synchronized: N/A<br />Date of last known Upgrade: N/A<br />Most Recent Known Modification: N/A<br />Year Opened: 1980 |} '''Sunbow Terrace Condos''' is a condo building located at #5 906 4 Ave...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards 2280
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 1980

Sunbow Terrace Condos is a condo building located at #5 906 4 Ave NW, in Calgary, Alberta, Canada. The building was built in 1980, and the fire alarm system is original.

System Specifications

Please note that these details are accurate to 2018.

FACP

The building is protected by an Edwards 2280 conventional fire alarm system. The panel is located at the main entrance. The system coding is continuous.

Notification Appliances

All notification appliances are Kidde KC6106 vibrating bells (6" gong).

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in all corridors and at the top of each stairwell.
There are Mircom TD-135 conventional 135°F fixed-temperature heat detectors at the top of the west stairwell, and in all janitor and boiler rooms.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.