Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

The Home Depot (Shawnessy)

From FireAlarmPedia
System Specifications
FACP: Notifier System 500
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
Date of last known Upgrade: Early 2010s
Year Opened: 1998

The Home Depot is an American hardware store franchise, with locations all over North America. This particular location is in the Shawnessy area of Southwest Calgary. The building was built in 1998, and most of the system is original. The fire alarm system here is basically the same as the Mackenzie location, but conventional.

System Specifications

FACP

The store is protected by a Notifier System 500 fire alarm system. The main panel is not visible, but has been confirmed by an annunciator. It is original to the building.

Annunciators

There is a Notifier AFM-16AT annunciator at the entrance, which is also original.

Notification Appliances

The notification appliances are mainly the original System Sensor "SpectrAlert" P2415A (red, wall, multi-candela) horn/strobes. The restrooms have System Sensor "SpectrAlert" S2415A (red, wall, multi-candela) strobes. Some of the original horn/strobes have been replaced with Mircom FHS-240R horn/strobes.

Initiating Devices

Pull Stations

The pull stations are mostly the original Notifier MPS-950B pull stations. Replacement pull stations include a Simplex MS-301C in the exit, and a Tyco/Grinnell MS-401.

Automatic Detection Devices

None noticed, likely due to high ceilings.

Bonus Information

This store uses System Sensor "SpectrAlert" H12/24W (white) remote horns as door alarms, which are also original. They are set to code 3, electromechanical, which likely causes issues, since the fire alarms most likely sound exactly the same, but they are not connected to the fire alarm system.