Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Canyon Meadows Station

From FireAlarmPedia
Revision as of 13:49, 20 November 2022 by TwentyThree33 (talk | contribs) (Chase, you suck ass. This wasn't your fault but I'm blaming you anyway.)
System Specifications
FACP: EST QuickStart QS1
FACP Location: Main Electrical Room
System Type:Addressable
System Line Voltage: 120VAC
NAC Voltage:24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, EST
Date of last known Upgrade: 2016
Year Opened: 2001

Canyon Meadows is an CTrain LRT station in SW Calgary, it was opened in 2001 as part of the South LRT Extension on the Calgary Transit Red Line. The fire alarm system is from 2016.

System Specifications

FACP

The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in an electrical room next to the elevator on the platform level. The system runs EST's Signature-series addressable protocol, and the system coding is temporal.

Annunciators

There is an EST QSA-1-C annunciator at the main entrance, with an EST QS1-CPU-1 annunciator and an EST SL30 zone annunciation card inside.

Notification Appliances

All notification appliances are EST "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no lettering, set to 15cd) mounted on EST G1TR trim plates.

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 addressable single action pull stations.

Automatic Detection Devices

There are EST SIGA2-PS addressable photoelectric smoke detectors throughout the station, mounted on EST SIGA-SB bases.

System Specifications (2001-2016)

FACP

The building was protected by a Notifier AFP-200 addressable fire alarm system. The panel was located at the entrance to the platform. The system ran Notifier's CLIP addressable protocol, and the system coding was temporal.

Annunciators

There was a Notifier LCD-80 annunciator at the main entrance to the station, where the current annunciator sits.

Notification Appliances

All notification appliances were System Sensor "SpectrAlert" P2415A horn/strobes (red, wall-mount, 15cd).

Initiating Devices

Pull Stations

All pull stations were Notifier MPS-950B conventional single-action pull stations. Each pull station was wired to a Notifier MMX-101A addressable monitor module, mounted directly behind each station.

Automatic Detection Devices

Not known, but were present.

Known Activations

November 19, 2022: At approximately 2:15 PM, the pull station by the east platform door was pulled. CFD investigated the alarm, and it was found to be false. No information is known regarding who activated the alarm. More activations to be added later.