More actions
| System Specifications |
|---|
| FACP: Vigilant VS2 FACP Location: Main Entrance Vestibule System Type: Hybrid System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes Date of last known Upgrade: late 2010s Year Opened: 1955/1993 |
129 Powell Street is a the address given to an abandoned school building in Downtown Cochrane, AB. The school was built in the 1955 as Andrew Sibbald School. The school then underwent renovations in 1959, 1969 and 1989. The school went yet another renovation and started to be rented by CCSD in 1993, in which the school became Holy Spirit. The school has had two fire alarm systems in the past 28 years of operation, and there are two old, possibly original pull stations still intact. The current fire alarm system has been in the school since 2014. In June 2021, a new school is going to be constructed to replace Holy Spirit. In 2022, the school moved. The system is serviced and managed by Altex Security Systems.
System Specifications (2014-present)
FACP
The school is protected by a Vigilant VS2 hybrid-addressable fire alarm system. The panel is located in the main entrance vestibule, and was installed in June 2014 as a replacement for an EST 6616. The system partially ran Vigilant's GSA addressable protocol, and the system coding is temporal.
Notification Appliances
The notification appliances inside are all EST "Genesis" G1R-HDVM (red, wall, no FIRE lettering) horn/strobes, mostly installed on two-device backboxes in the hallway. They can also be found in three classrooms and the library. They are all set to 15 cd, but can vary between low and high volume. There is an EST "Genesis" GC-HDVM (white, ceiling, no FIRE lettering) horn/strobe in the new portable. For outdoor notification, there is an EST "Genesis" WG4RF-HVMC (red, FIRE lettering) horn/strobe pointed at the large field, under a protective cover. All of these horn/strobes were installed in 2014, replacing the bell/strobes.
Initiating Devices
Pull Stations
The pull stations are all Edwards 270-SPO conventional pull stations left over from the previous system. They were mostly installed in 1993 when the 6616 was installed, however there is one original first-generation 270-SPO (Classic shield, FIRE ALARM) in a portable. As of May 2022, a 270-SPO by the end of the school was replaced with a newer variant (deficiency replacement).
Automatic Detection Devices
The smoke detectors are EST SIGA2-PS addressable photoelectric smoke detectors installed in 2014. The heat detectors are Edwards EC20FTU-3 fixed temprature heat detectors. They were installed in 2020 replacing Edwards 281B-PL rate-of-rise heat detectors that were kept from the EST 6616 (installed 1993).
Former System Specifications (1993-2014)
| System Specifications |
|---|
| FACP: EST 6616 FACP Location: Main Entrance Vestibule System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Strobes Synchronized: No Date of last known Upgrade: 2000s Year Decomissioned: 2014 |
FACP
The school was protected by an EST 6616 conventional fire alarm system. The panel was located in the main entrance vestibule, and was installed in 1993. Only eight zones were in use at the time. The system coding was continuous. It was replaced in 2014 with the Vigilant system despite no issues.
Notification Appliances
Most notification appliances were Wheelock MBS-G10-24 motor bell/strobes (10" gong, 1.5cd). There was an Edwards 439D-10AWC vibrating bell (10" gong) on an EST "Integrity" 403-5A-R (15cd) strobe plate installed in the early 2000s as a deficiency replacement. There was an Edwards 439D-6AWC vibrating bell (6" gong) on a Simplex 4903-9101 strobe plate (4.5cd) with the strobe above the bell in the portable. The outdoor notification appliances were Edwards 439D-10AWC vibrating bells (10" gong), one by the large field and one by an entrance, installed in 1993. For some reason, the bells were not loud enough, and when they removed the outdoor bells, they only replaced one.
Initiating Devices
Pull Stations
The pull stations were the Edwards 270-SPO pull stations that are still installed today.
Automatic Detection Devices
The heat detectors were the Edwards 280B-PL that were kept on the Vigilant system, but the smoke detectors were Edwards 6249C photoelectric smoke detectors.