Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Southcentre Mall

From FireAlarmPedia
Revision as of 15:09, 2 April 2023 by Twentytwo22 (talk | contribs)
System Specifications
FACP: Siemens Desigo
FACP Location: East Entrance Vestibule
System Type: Addressable, Two-Stage
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (First Stage)
Temporal (GA)
Strobes Synchronized: Yes
Date of last known Upgrade: 2020
Year Opened: 1974

Southcentre Mall is a large indoor shopping mall located at 100 Anderson Road Southeast, in Calgary, Alberta, Canada. The mall is owned by Oxford Properties, and has over 160 stores. The mall originally opened in 1974, and was extensively renovated in 2009. The fire alarm system for the main mall was installed in 2009, and the FACP was replaced in 2020. The Sporting Life system was installed in 2016. The Hudsons Bay system was installed in the 2000s. The Decathlon/Winners system was installed in 2022. All systems are networked into each other to trip when one goes into alarm, and were installed due to the mall’s panel not having enough capacity.

System Specifications (Main Mall)

FACP

The building is protected by a Siemens Desigo Life Safety Modular addressable fire alarm system. The panel is located in the east entrance vestibule. The system runs Siemens’ FirePrint addressable protocol, and is configured for two-stage operation. First stage coding is 20BPM, followed by temporal in general alarm. The two-stage timer length is five minutes. The Desigo replaced a Siemens MXL in 2020.

Notification Appliances

All notification appliances are Siemens MTH-MC-R-B horn/strobes (red, wall-mount). These are set to the horn tone. Some areas have Siemens U-MCS remote strobes (red, wall-mount) above the ceiling, however the purpose and status of these is unknown.

Initiating Devices

Pull Stations

All pull stations are Siemens HMS-2S addressable two-stage single-action pull stations.

Automatic Detection Devices

There are Siemens FDBZ492-HR duct smoke detectors with FDO421 photoelectric heads on them throughout the mall. Each detector is located near an air handling unit, and has a Siemens RL-HC remote LED indicator mounted on the drop ceiling below the device. The professional offices and elevator shafts have Siemens FDOOT441 addressable multisensor smoke/heat detectors.

System Specifications (Sporting Life)

System Specifications
FACP: Siemens FireFinder XLS
FACP Location: Unknown
System Type: Addressable, Two-Stage
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (First Stage)
Temporal (GA)
Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Opened: 2016

FACP

The building is protected by a Siemens FireFInder XLS addressable fire alarm system. The panel location is unknown. The system runs Siemens’ FirePrint addressable protocol, and is configured for two-stage operation. First stage coding is 20BPM, followed by temporal in general alarm. The two-stage timer length is five minutes. This FACP is networked to both the main mall and Decathlon FACPs.

Annunciators

There is a Siemens annunciator in the main entrance vestibule, however its model is unknown at this time.

Notification Appliances

All notification appliances are Siemens MTH-MC-R-B horn/strobes (red, wall-mount). These are set to the horn tone.

Initiating Devices

Pull Stations

All pull stations are Siemens HMS-2S addressable two-stage single-action pull stations.

Automatic Detection Devices

There are Siemens HFP-11 addressable multisensor smoke/heat detectors throughout the building.

System Specifications (Decathlon/Winners/Dollarama)

System Specifications
FACP: Siemens FireFInder XLS
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC (Visual)
70.7VRMS (Audible)
System Coding: Unknown
Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Opened: 2021

FACP

The building is protected by a Siemens FireFinder XLS addressable fire alarm system. The panel location is unknown. The system runs Siemens’ FirePrint addressable protocol, and is configured for two-stage operation. The system is equipped with voice evacuation, however the messages and/or tones are unknown at this time.

Annunciators

There is a Siemens SSD annunciator in the Winners main entrance vestibule.

Notification Appliances

All notification appliances are Siemens SE-MC-W-B speaker/strobes (white, wall-mount, bilingual lettering).

Initiating Devices

Pull Stations

All pull stations are Siemens HMS-2S addressable two-stage single-action pull stations.

Automatic Detection Devices

None noticed.

System Specifications (Hudsons Bay)

System Specifications
FACP: Mircom FX-2000
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Date of last known Upgrade: 2004
Year Opened: 1974

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. This panel is wired to the main mall’s panel as an addressable point, and is not networked.

Annunciators

There are Mircom RAX-LCD annunciators paired with RAX-1048TZDS annunciators at most entrances. All annunciators are in Mircom BB-1002 dual-bay annunciator cabinets.

Notification Appliances

Most notification appliances are Mircom BL-10B motor bells (10” gong). Some areas have Simplex 2901-9724 motor bells (10” gong) as deficiency replacements.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

None noticed.

System Specifications (Sears, 1999-2018)

System Specifications
FACP: Cerberus Pyrotronics MXL
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (First Stage)
Temporal (GA)
Strobes Synchronized: Yes
Year Decommissioned: 2018
Year Opened: 1999

FACP

The building was protected by a Cerberus Pyrotronics MXL addressable fire alarm system. The panel location was unknown. The system ran Cerberus’ FirePrint addressable protocol, and was configured for two-stage operation. First stage coding was 20BPM, followed by temporal in general alarm. The two-stage timer length was five minutes.

Annunciators

There was a Cerberus Pyrotronics MKB-2 annunciator in the second floor east entrance vestibule.

Notification Appliances

All notification appliances were Cerberus Pyrotronics U-MMT-S17 horn/strobes (red, wall-mount). These were set to the horn tone.

Initiating Devices

Pull Stations

All pull stations were Cerberus Pyrotronics MSI-2S addressable two-stage single-action pull stations.

Automatic Detection Devices

Not known.