Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

St. Thomas Aquinas School

From FireAlarmPedia
Revision as of 16:09, 2 April 2023 by Twentytwo22 (talk | contribs)
System Specifications
FACP: EST QuickStart QSC
FACP Location: Boiler Room
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Self-Sync
Date of last known Upgrade: 2013
Year Opened: 1955

St. Thomas Aquinas School is a Catholic elementary school located at 4540 26 Avenue Southwest, in Calgary, Alberta. The school is owned and operated by the Calgary Catholic School District. The school opened in 1955, and the current fire alarm system was upgraded in 2013.

System Specifications

FACP

The building is protected by an EST QuickStart QSC conventional fire alarm system. The panel is likely located in the boiler room. The system coding is temporal.

Annunciators

There is an EST QSA-1-S annunciator at the main entrance, equipped with an EST QSC-CPU-1 control card and an SL30 zone annunciation card. This annunciator is mounted inside the cabinet of the previous FACP, an Edwards Custom 6500.

Notification Appliances

All indoor notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no lettering, set to 15cd). For outdoor notification, there is an Edwards CS405-7A-T weatherproof remote strobe (red, wall-mount, 15/75cd) outside the main entrance.

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

Not known.

System Specifications (1970s-2013)

Please note that all information except the FACP section is unconfirmed.

FACP

The building was protected by an Edwards Custom 6500 conventional fire alarm system. The panel was located at the main entrance. The system coding was march time (120BPM).

Notification Appliances

All notification appliances were Edwards “Durabel” 6100D vibrating bells (6” gong).

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional single-action pull stations. It is unknown if these were replaced, or if they are still in use on the new system.

Automatic Detection Devices

Not known.