Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Brookfield Place

From FireAlarmPedia
Revision as of 12:58, 3 April 2023 by Twentytwo22 (talk | contribs)
System Specifications
FACP: EST3
System Type: Addressable (Networked)
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS (audible)
24VDC (visual)
Date of last known Upgrade: N/A
Year Opened: 2017

Brookfield Place is a commercial development complex, otherwise an office building in Downtown Calgary, AB. It is the tallest building in Calgary, standing 56 floors tall, and started construction in 2013, and then was finished in 2017, so the system is original from 2017. The fire alarm system also supervises the +15 skywalk hallways toward [[Bow Valley Squar] to the north, and [[Stephen Avenue Plac] to the south.

Note: This page is incomplete, and has not been redone. More information is needed on this system.

System Specifications

FACP

The building is protected by an Edwards EST3 addressable fire alarm system. The panels are located in the CACF room, which is located on the main floor. The system runs EST's Signature-series addressable protocol, and is equipped with voice evacuation. The system is configured for two-stage operation, however the messages and/or tones are unknown at this time.

Notification Appliances

The main notification appliances indoors are EST Genesis GC-S7 (white, ceiling, no FIRE marking) speakers. They can be found in hallways, one entrance and the high ceiling on the 2nd floor. On one side of the 2nd floor, there are EST Genesis G1-VM (white, wall, no FIRE marking) remote strobes, with the other side having EST G4-S7 (white, wall, no FIRE marking) speakers. At the entrance below the 2nd floor, there's an EST "Integrity" 757-1A-S70W speaker. In the hallways for the +15 skywalk and some ceilings, there are EST GC-S7VM (white, ceiling, no FIRE) speaker/strobes set to 15 cd, and 1/2 watt.

Initiating Devices

Pull Stations

The pull stations are EST SIGA-270P from 2013-2017. Some are GE branded, while some are the new EST logo.

Automatic Detection Devices

All smoke detectors are EST SIGA2-PS intelligent photoelectric detectors with the exception of one EST SIGA-PS intelligent photoelectric detector. [[]