Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Alberta Boot Company

From FireAlarmPedia
Revision as of 20:33, 8 August 2023 by TwentyThree33 (talk | contribs) (And here we go! Large page dump incoming.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: North Entrance
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: 2013
Year Opened: 1952

Alberta Boot Company is a boot manufacturer located at 121 10 Avenue Southeast, in Calgary, Alberta, Canada. The building opened in 1952, and has been renovated several times. The fire alarm system was upgraded in 2013.

System Specifications (2013-present)

FACP

The building is protected by a Notifier NFS-320C conventional fire alarm system. The panel is located at the north entrance. The system has several zone cards to accommodate the conventional system, and the system coding is temporal.

Notification Appliances

Most notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd). Recently renovated areas have System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

Most pull stations are Notifier MPS-950B conventional single-action pull stations. Some areas have Notifier NFM-950B conventional single-action pull stations, left over from the previous system.

Automatic Detection Devices

There are System Sensor “i3” C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. The building is equipped with a wet sprinkler system; the tamper and flow switches have dedicated supervisory and alarm zones.