More actions
Jasper Inn & Suites is a 3-star hotel in Jasper, AB. It features an indoor pool, many suites and spans two floors. It was formerly owned by Best Western, when INNHotels bought them in the last few years. The hotel was built in 1972. Three buildings have systems; the main office building and the hotel wing in it, the Inn Grill/pool building, and the Maligne Suites.. The other areas are protected by Kidde 900-0119 talking ionization smoke & carbon monoxide alarms, as they are outdoor suites. The systems are not original, however the pull stations in one building are original. All buildings had their NACs redone in 2020.
System Specifications (Reception & Cedar Suites)
| System Specifications |
|---|
| FACP: Grinnell Series M-1000 FACP Location: Stairwell near Reception System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal (self-coded) Strobes Synchronized: No Date of last known Upgrade: 2022 Year Opened: 1972 |
FACP
This building is protected by a Grinnell Series M-1000 conventional fire alarm system. The panel is located by the stairwell adjacent to reception, which is accessible by an exterior doorway. It has about 20 zones in use, and was installed in the 2000s or early 2010s. The system coding is most likely continuous, but the notification appliances are self-coded to temporal.
Notification Appliances
The notification appliances are mostly System Sensor “L-Series” P2RLA (red, wall mount, bilingual) horn/strobes, set to electromechanical temporal, 15cd. They replaced Edwards 439D-6AWC vibrating bells in 2020. Above the panel in the stairwell, there is a System Sensor PA400SWA (red, silenceable) mini-horn with a System Sensor SS-24 strobe beside it (red, wall-mount, 1.5cd), the only notification appliances to remain unchanged after the upgrade.
Initiating Devices
Pull Stations
All pull stations are Edwards 270-SPO conventional pull stations, installed in the mid-1980s (270A font, no FIRE ALARM)
Automatic Detection Devices
Most smoke detectors are System Sensor “i3” C2W-BA photoelectric smoke detectors. There is a Mircom “i3” 2W-BA photoelectric smoke detector by the panel, installed as a deficiency replacement for a System Sensor 1412A ionization smoke detector in 2022.
System Specifications (Inn Grill, pools, 200-400 suites)
| System Specifications |
|---|
| FACP: Mircom Series 1000? FACP Location: Unknown System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2020 Year Opened: 1972 |
FACP
The building is protected by a Mircom Series 1000 conventional fire alarm system. The panel location is unknown, but is confirmed from the other two buildings. The system coding is likely continuous, as the notification appliances are self-coded to temporal.
Notification Appliances
The notification appliances in the Inn Grill, pool area and first two floors of the suites are System Sensor “L-Series” P2RLA (red, wall-mount, bilingual, set to electromechanical temporal 15cd) horn/strobes. The upper floors have System Sensor “SpectrAlert Advance” P2RA (red, wall-mount, set to 15cd) horn/strobes, likely new old stock. These horn/strobes were installed in 2020, replacing a mix of Edwards 439D-6AWC vibrating bells (6” gong) and Edwards “Durabel” 6100D vibrating bells (6” gong).
Initiating Devices
Pull Stations
All pull stations are Edwards 270-SPO conventional pull stations. Most are the original first-generation variants, mixed with the variant above, along with a few second-generation variants.
Automatic Detection Devices
The smoke detectors are all Mircom “i3” 2W-BA photoelectric conventional smoke detectors. The laundry hallway contains Mircom 5601A fixed-temperature/rate of rise mechanical heat detectors, and the pool hallway contains one Mircom TD-135 fixed-temperature heat detector.
System Specifications (Maligne Suites)
| System Specifications |
|---|
| FACP: Mircom Series 1000 FACP Location: Main Entrance Vestibule System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes Date of last known Upgrade: 2022 Year Opened: Late 80s-early 90s |
FACP
The suites are protected by a Mircom Series 1000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is continuous, as the notification appliances are self-coded to temporal. The panel was installed sometime before 2015.
Notification Appliances
All notification appliances are System Sensor “L-Series” P2RLA-E (red, wall-mount, English only, set to electromechanical, temporal, 15cd) horn/strobes. These were installed in 2020 replacing Notifier KMS-6-24VDC/P motor bells (6” gong).
Initiating Devices
Pull Stations
All pull stations are Notifier MPS-950B conventional pull stations. These are the original models, with the black labels.
Automatic Detection Devices
The smoke detectors are Mircom “i3” 2W-BA conventional photoelectric smoke detectors.