Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

McDonald's (Sparrow Drive)

From FireAlarmPedia
System Specifications
FACP: Edwards FireShield Plus FSP502G
FACP Location: Unknown
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Date of last known Upgrade: 2018
Year Opened: 1981

McDonald's is the world’s largest fast food restaurant chain.  They are headquartered in Chicago, Illinois, USA, and have over 40,000 locations globally.  This particular restaurant is located at 6504 Sparrow Drive, in Leduc, Alberta, Canada.  The restaurant opened in 1981, and was renovated in 2018.  The fire alarm system is from the renovation, but the pull stations remain original.

System Specifications (2018-present)

Please note that some system information is unconfirmed.  This page should not be used for official purposes.

FACP

The building is protected by an Edwards FireShield Plus FSP502G conventional fire alarm system.  The panel location is unknown.  The system coding is likely temporal.

Notification Appliances

All notification appliances are Edwards MB10-24 motor bells (10” gong).

Initiating Devices

Pull Stations

All pull stations are the original Edwards 274-111 conventional single-action pull stations.

Automatic Detection Devices

Unknown at this time.

System Specifications (1981-2018)

System Specifications
FACP: Edwards 1527
FACP Location: Unknown
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Date of last known Upgrade: 1990s
Year Decommissioned: 2018

FACP

The building was protected by an Edwards 1527 conventional fire alarm system.  The panel location was unknown.  The system coding was continuous.

Notification Appliances

The main dining room had an Edwards “Durabel” 6100D vibrating bell (6” gong).  The playplace had a Mirtone 74330 vibrating bell (10” gong), installed as a deficiency replacement.

Initiating Devices

Pull Stations

All pull stations were Edwards 274-111 conventional single-action pull stations.  These remain in use on the new system.

Automatic Detection Devices

Unknown.