Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

504 Patricia St, Jasper

From FireAlarmPedia
Revision as of 16:40, 21 December 2023 by Alberta Fire Alarms (talk | contribs) (we like these too!)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: 2020?
Year Opened: Unknown

504 Patricia St is the address given to a small building in Jasper, AB. Its tenants are Scoops & Loops, The Raven Bistro and 3 Sheets Jasper. It is unknown when the building was built, but the fire alarm system was upgraded around 2020.

System Specifications (2020-present)

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There is a Notifier FST-851A addressable thermal heat detector in 3 Sheets Jasper, mounted on a System Sensor B210LPA base.

Former System Specifications (1990s-2020)

Former System Specifications
FACP: Notifier SFP-400B
FACP Location: Unknown
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: 1990s
Year Decommissioned: 2020

FACP

The building was protected by a Notifier SFP-400B conventional fire alarm system. The panel location was unknown. The system coding was continuous.

Notification Appliances

All notification appliances were System Sensor “Multi-Alert Sounder/Strobe” MASS24LO sounder/strobes (red, wall-mount, 1.5cd). These were set to 800Hz continuous.

Initiating Devices

Pull Stations

All pull stations were Notifier NFM-950B conventional pull stations.

Automatic Detection Devices

There was an FDD CR135 rate-of-rise heat detector in 3 Sheets Jasper.