Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Shepard Landfill Building A

From FireAlarmPedia
Revision as of 11:45, 16 March 2024 by Alberta Fire Alarms (talk | contribs) (Manage your waste.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Entrance Vestibule
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: 2010
Year Opened: 1969

Shepard Landfill is a waste management facility owned and operated by the City of Calgary. The facility is located at 12111 68 Street SE, in Calgary, Alberta, Canada. This page will cover Building A, which is an office building. The building was built in 1969, was expanded twice in the 1970s and 1980s. It was then renovated in 2010; the fire alarm system was installed after this renovation.

System Specifications (2010-present)

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are from System Sensor’s “SpectrAlert Advance” line of products.
All indoor notification appliances are System Sensor PC2WA horn/strobes (white, ceiling-mount, set to 15cd).
For outdoor notification, there is a System Sensor SRKA weatherproof remote strobe (red, wall-mount, set to 75cd).

Initiating Devices

Pull Stations

Most pull stations are Notifier NBG-12LX addressable dual-action pull stations.
There are conventional pull stations in exterior storage rooms, model unknown. These are wired to Notifier FMM-1A addressable monitor modules.

Automatic Detection Devices

There are Notifier FSP-851A addressable photoelectric smoke detectors throughout the building.
The kitchens and mechanical room have Notifier FST-851RA addressable thermal rate-of-rise heat detectors.
All detectors are mounted on System Sensor B210LPA bases.
There are conventional heat detectors in the exterior storage rooms, model to be confirmed. These are wired to Notifier FMM-1A addressable monitor modules.

Modules

There are Notifier FMM-1A addressable monitor modules supervising the conventional pull stations and heat detectors in the exterior storage rooms.
There are Notifier ISO-XA isolator modules on each SLC.