Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Foothills Aquatic Centre

From FireAlarmPedia
Revision as of 00:44, 17 April 2024 by Alberta Fire Alarms (talk | contribs) (Mircom went to shit it seems. Final upload for now)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-401
FACP Location: Main Entrance Vestibule
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: 2024
Year Opened: 1964, 1991

Foothills Aquatic Centre is an indoor swimming pool located at 2915 24 Ave NW, Calgary, Alberta. It is owned and operated by the City of Calgary. It was built in 1964, and expanded in 1991. The fire alarm system was upgraded this year.

System Specifications (2024-present)

FACP

The building is protected by a Mircom FX-401 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s MGC addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are from System Sensor’s “SpectrAlert Advance” line of products.
Most notification appliances are System Sensor P2RKA weatherproof horn/strobes (red, wall-mount, set to 75cd).
Some areas have System Sensor SRKA weatherproof remote strobes (red, wall-mount, set to 75cd).
For exterior notification, there is a System Sensor HRKA weatherproof horn (red, wall-mount).
These notification appliances were kept from the previous system, and were installed in 2019.

Initiating Devices

Pull Stations

All pull stations are Mircom MPS-810MP addressable dual-action pull stations.

Automatic Detection Devices

Most areas have Mircom MIX-4030 addressable 135°F/175°F fixed-temperature/rate-of-rise heat detectors.
Some areas have Mircom MIX-4010 addressable photoelectric smoke detectors.
All detectors are mounted on Mircom MIX-4002 bases.

Former System Specifications (2007-2024)

Former System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance Vestibule
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: 2019
Year Installed: 2007
Year Decommissioned: 2024


FACP

The building was protected by a Mircom FX-2000 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran Mircom’s CLIP addressable protocol, and the system coding was continuous; the horn/strobes were self-coded.

Notification Appliances

All notification appliances are from System Sensor’s “SpectrAlert Advance” line of products.
Most notification appliances are System Sensor P2RKA weatherproof horn/strobes (red, wall-mount, set to 75cd).
Some areas have System Sensor SRKA weatherproof remote strobes (red, wall-mount, set to 75cd).
For exterior notification, there is a System Sensor HRKA weatherproof horn (red, wall-mount).
These notification appliances are still in service, and were installed in 2019 replacing Edwards 439D-10AWC vibrating bells (10” gong), which were installed in 1991.

Initiating Devices

Pull Stations

All pull stations except one were Mircom MS-401 conventional single-action pull stations, wired to Mircom MIX-M501MA addressable monitor modules.
There was one Mircom MS-401AP addressable single-action pull station as a deficiency replacement.

Automatic Detection Devices

Most areas had Mircom MIX-5251RBA addressable 135°F fixed-temperature/rate-of-rise heat detectors.
Some areas had Mircom MIX-2251BA addressable photoelectric smoke detectors.
All detectors were mounted on System Sensor B710LPA bases.