Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Baymont by Wyndham Glenview

From FireAlarmPedia
Revision as of 16:37, 22 May 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Vigilant VS2
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2016
Year Opened: 1985

Baymont by Wyndham is a chain of franchised hotels. This particular hotel is located at 1625 Milwaukee Ave, Glenview, Illinois. The hotel was built in 1985, and was renovated in 2016; the fire alarm system was upgraded as part of this renovation.

System Specifications (2016-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Vigilant VS2 addressable fire alarm system. The panel location is unknown. The system runs Vigilant’s GSA addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are EST “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd). These are mounted on G1RT-FIRE trim plates.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Vigilant GSA-M278 addressable dual-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Vigilant V-PS addressable photoelectric smoke detectors throughout, mounted on Edwards SB4U bases.