Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Coast Nisku Inn & Conference Centre

From FireAlarmPedia
System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance Vestibule
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes
Date of last known Upgrade: 2019
Year Opened: 1981


Coast Nisku Inn & Conference Centre is a 3-star hotel located at 1101 4 St, in Nisku, AB. Its amenities include a pool, and two restaurants. The hotel opened in 1981 as Nisku Inn, and was extensively renovated in 2018 when Coast Hotels bought it. The fire alarm system was installed following the renovation.


System Specifications (2018-present)

FACP

The hotel is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system was installed in 2018 following a renovation. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator by the front desk. Both annunciators are mounted in a Mircom BB-1002 enclosure.

Notification Appliances

Most notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R (red, wall-mount, set to high volume broadband, 15cd) horn/strobes, located throughout the hotel.

In the kitchen and back hallway, there are Mircom FHS-400-RR (red, wall-mount, set to 15cd, low volume) horn/strobes.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable pull stations.

Automatic Detection Devices

There are Mircom MIX-2251APA addressable photoelectric smoke detectors in hallways and storage rooms, mounted on System Sensor B210LPA bases. The rest of the hotel is protected by a sprinkler system with waterflow.

Accessories

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system.

Former System Specifications (1981-2018)

System Specifications
FACP: Mircom Series 1000
FACP Location: Main Entrance Vestibule
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal?
Date of last known Upgrade: 2000s
Year Decomissioned: 2018

FACP

The building was protected by a Mircom Series 1000 conventional fire alarm system. The panel was located in the main entrance vestibule. The system coding was temporal.

The Series 1000 replaced the original Edwards Custom 6500 in the 2000s.

Annunciators

There was a Mircom RAX-1032TZDS LED annunciator at the front desk.

Notification Appliances

All notification appliances were Edwards "Durabel" 6100D vibrating bells (10" gong).

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional pull stations.

Automatic Detection Devices

There were Edwards 281A conventional fixed/rate-of-rise heat detectors in storage rooms. The building was protected by a sprinkler system, which was added when the Series 1000 was installed.

Known Activations

  • March 10, 2023 - a guest lit a candle under a lampshade, which caught fire. A pull station was activated, and the alarm sounded. Most occupants believed it was false, but it was not and the hotel was evacuated. Leduc County Fire Services responded and put out the fire. Occupants were allowed back in after about 30 minutes.