Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

HI Lake Louise Alpine Centre

From FireAlarmPedia

HI Lake Louise Alpine Centre is a hostel located at 203 Village Rd, Lake Louise, AB. It was originally built in 1990 as the Canadian Alpine Centre. A second building was built in 1995. The fire alarm systems in these buildings were upgraded around 2017.

Main Building/West Wing (1990)

System Specifications (2017-present)

System Specifications
FACP: Notifier NFS-320C
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized Yes, SS
Date of last known Upgrade: 2017
Year Opened: 1990

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There are Notifier FSP-851A addressable photoelectric smoke detectors located throughout the building, as well as Notifier FST-851A addressable thermal heat detectors in some areas. All detectors are mounted on System Sensor B210LPA bases.

Former System Specifications (1990-2017)

System Specifications
FACP: Edwards 6616
FACP Location: Unknown
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Date of last known Upgrade: N/A
Year Decommissioned: 2017

FACP

The building was protected by an Edwards 6616 conventional fire alarm system. The panel location was unknown, and the model was unconfirmed. The system coding was continuous.

Notification Appliances

All notification appliances were Edwards 439D-6AWC vibrating bells (6” gong).

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional pull stations.

Automatic Detection Devices

There were Edwards 6250C ionization smoke detectors located throughout. There were also Edwards 281C rate-of-rise/fixed heat detectors in some areas.

East Wing/Building 2 (1995)

System Specifications (2017-present)

System Specifications
FACP: Notifier NFS-320C
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized Yes, SS
Date of last known Upgrade: 2017
Year Opened: 1995

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Notifier MPS-950B conventional pull stations. These are wired to FMM-101A addressable monitor modules, located directly behind each station.

Automatic Detection Devices

There are Notifier FSP-851A addressable photoelectric smoke detectors located throughout the building, mounted on System Sensor B210LPA bases. There is one Notifier FSP-951A addressable photoelectric smoke detector in the kitchen as a deficiency replacement, mounted on a System Sensor B300A-6 base. There are also Notifier FST-851A addressable thermal heat detectors in some areas.

Former System Specifications (2000s-2017)

System Specifications
FACP: Notifier AFP-200C
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal?
Strobes Synchronized: No
Date of last known Upgrade: 2000s
Year Decommissioned: 2017

FACP

The building was protected by a Notifier AFP-200C addressable fire alarm system. The panel location was unknown. The system ran Notifier’s CLIP addressable protocol, and the system coding was temporal.

Notification Appliances

Common Areas

All common area notification appliances were EST 792-7A-006 horn/strobes (red, wall-mount, 15/75cd).

Guest Rooms

All guest rooms had EST 692-7A-103 mini-horn/strobes (white, wall-mount, 15/75cd).

Initiating Devices

Pull Stations

All pull stations were Notifier MPS-950B conventional pull stations. These were wired to Notifier FMM-101A addressable monitor modules. These are still in use on the current system.

Automatic Detection Devices

There were Notifier FSP-851A addressable photoelectric smoke detectors located throughout the building. There were also Notifier FST-851A addressable thermal heat detectors in some areas. All detectors were mounted on System Sensor B210LPA bases. These are still in use on the current system.

Former System Specifications (1995-2000s)

System Specifications
FACP: EST 6616
FACP Location: Unknown
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Decommissioned: 2000s

FACP

The building was protected by an EST 6616 conventional fire alarm system. The panel location was unknown, and the model was unconfirmed. The system coding was continuous. The system was replaced in the 2000s, likely after a main board failure.

Notification Appliances

Common Areas

All common area notification appliances were EST 792-7A-006 horn/strobes (red, wall-mount, 15/75cd). These were kept on the AFP-200C.

Guest Rooms

All guest rooms had EST 692-7A-103 mini-horn/strobes (white, wall-mount, 15/75cd). These were kept on the AFP-200C.

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional pull stations.

Automatic Detection Devices

There were Edwards 6250C ionization smoke detectors located throughout. There were also Edwards 281C rate-of-rise/fixed heat detectors in some areas.