Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Alberta Research Council Calgary Research Park

From FireAlarmPedia
Revision as of 23:23, 8 July 2024 by Alberta Fire Alarms (talk | contribs) (Created page with " {| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier AFP-200 <br />FACP Location: Main Entrance Vestibule <br />System Type: Add...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier AFP-200
FACP Location: Main Entrance Vestibule
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 1999

The Calgary Research Park is a large laboratory and research facility located at 3608 33 Street NW, in Calgary, Alberta, Canada. The facility is owned by the Alberta provincial government. The building was built in 1999, and the fire alarm system is original, with replacement devices installed as deficiencies occur.

System Specifications

FACP

The building is protected by a Notifier AFP-200 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier’s CLIP addressable protocol, and the system coding is continuous.

Notification Appliances

Most notification appliances are System Sensor “Multi-Alert” MA/SS24MA sounder strobes (red, wall-mount, 15cd, set to 800Hz).
Some areas have System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd).
Some areas have Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd) as deficiency replacements.
One corridor has a Mircom FHS-240R horn/strobe (red, wall-mount, set to electromechanical/15cd) as a deficiency replacement.

Initiating Devices

Pull Stations

Most pull stations are Notifier NFM-950B conventional single-action pull stations.
Some areas have Simplex MS-301C and Notifier MPS-950B conventional single-action pull stations as deficiency replacements.
All aforementioned stations have Notifier MMX-101A addressable monitor modules attached to them.
Some areas have Notifier NBG-12LX addressable dual-action pull stations as recent deficiency replacements.

Automatic Detection Devices

There are Notifier FSP-851A addressable photoelectric smoke detectors in some areas, such as the main atrium and in all stairwells.
Some areas have Notifier CPX-551A addressable ionization smoke detectors.
All CPX-series and some FSP-series detectors are mounted on Notifier BX501 bases.
Some FSP-series detectors are mounted on System Sensor B210LPA bases.
There is an FDD CR-135-EWP conventional explosion-proof 135°F fixed-temperature/rate-of-rise heat detector in the corrosive storage area, wired to a Notifier FDM-1A addressable dual-input monitor module.

Modules

There are Notifier MMX-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Notifier CMX-1A addressable relay modules for AHU shutdown.

EOLs

There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.