Edmonton International Airport

System Specifications
FACP: Simplex 4100ES FACP Location: Unknown System Type: Two-Stage Addressable (Networked) System Line Voltage: 120VAC NAC Voltage: 70.7VRMS (audible) 24VDC (visuals) System Coding: TBA Strobes Synchronized: Yes, Wheelock sync Date of last known Upgrade: 2016 Year Opened: 1960

Edmonton International Airport (also called YEG Airport) is the airport that serves Edmonton. It is not located directly in Edmonton, however it is located at 1000 Airport Road, Edmonton International Airport, AB, near Nisku. It was built in 1960, and was renovated most recently in 2016. The fire alarm system is from the 2016 renovation.

System Specifications (2016-present)

FACP

The building is protected by a two-stage networked Simplex 4100ES fire alarm system. The panel locations are unknown. The system runs Simplex's IDNet addressable protocol, and is equipped with voice-evacuation, and is two stage. The tones and/or messages are unknown at this time.

Notification Appliances

The notification appliances are mainly Wheelock E50-24MCW-FW speaker/strobes (white, wall-mount, set to 15cd), which can be found throughout the airport.

Low ceilings have Wheelock E60-24MCC-FW speaker/strobes (white, wall-mount, set to 30cd).

For additional sound coverage, there are Wheelock E50-W speakers (white, wall mount) and Wheelock E60-W speakers (white, ceiling-mount).

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9004CAB addressable bilingual two-stage single-action pull stations.

Automatic Detection Devices

There are Simplex 4098-9714 photoelectric addressable smoke detectors located throughout, mounted on 4098-9792 bases. There is also a sprinkler system with waterflow detection.

Modules

There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

There are Simplex 4090-9002 addressable relays serving various purposes.