Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Zeven Condominium Corporation

From FireAlarmPedia
Revision as of 18:27, 28 July 2024 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom Series FA-1000 <br />FACP Location: Main Entrance <br />System Type: Single-St...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom Series FA-1000
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: 2005
Year Opened: 1980

Zeven Condominium Corporation is a 3-storey walkup condo building located at 1810 16 Street SW, in Calgary, Alberta, Canada. The building was built in 1980, and the fire alarm system was upgraded in 2005, with a panel board replacement in 2010.

System Specifications (2005-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom Series FA-1000 conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.

Notification Appliances[edit | edit source]

All common areas have Mircom “Select-A-Horn/Strobe” FHS-240R horn/strobes (red, wall-mount, set to broadband/15cd).
All suites have Mircom MH-S25WA silenceable mini horns (white, wall-mount).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are ESL 528B conventional photoelectric smoke detectors in the second and third floor corridors, and at the top of each stairwell.
There is a System Sensor C2W-BA conventional photoelectric smoke detector in the first floor corridor as a deficiency replacement.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all circuits.